B laser light source error after less then a year

[Ernstson]

We changed laser in december 2025, and now we geting B laser light source error again 6105-0001 I tried to run laser software and it’s working to 50% but 40% a abnormally is found in b laser it says, is it 100 percent that is laser problem then? 

[yustas]

Less than one year has passed so you can ask your supplier to replace it.
It is their obligation.
6105 is the most serious error code for the laser.

[Dave S]

The 6105-0001 error means the Blue laser is running on maximum power now, which means the laser has deteriorated and is failing.

[Ernstson]

We bought a used mini lab exactly same as the one we had to take spare parts, it was a gambling from our side so we can not complain. and took the laser from that machine. Anyone that repairs laser and what is the cost ? 

[Ernstson]

Is it possible to change laser gun by our self ? Or is it impossible do do something like that? 

[yustas]

Yes, that's possible.

Just ask the company from which you plan to purchase the laser module for installation instructions.

[TECNOR]

Yes, its possible only need know install.

[Minilab service]

  I responded to you on private mesage.

Edited August 3 by Minilab service

[Ernstson]

Hi! 

We looking for someone to repair our A laser or if anyone sell a laser module to our Noritsu Qss 3201 Machine. Thanks.

[Admin]

Hi!

Apparently we need to make the banner even bigger.

Yes — the company advertised in the giant banner above your post repairs Noritsu lasers and supplies replacement laser modules for QSS machines, including the 3201.

Send us the error code / symptoms and some photos and we’ll take it from there. Email : office@minilabexpert.com

[Ernstson]

Ah sorry just used to press down the banner i will send you an email, thanks for your reply.