gofilm-minilab Posted August 25 Report Posted August 25 When I scan negatives, after I insert the film, the system runs a prescan and automatically previews the image, then immediately starts scanning on its own. I cannot review or adjust parameters manually after the prescan, and there is no option for me to click to start scanning manually. Is this a configurable setting in the software? I want to trigger the next‑step scan manually by clicking myself.
Minilab service Posted August 25 Report Posted August 25 SP500 can be connected to computer with FE software ( S2 and optional modules ) , or MS software ( MS01 server with scanner support, MS11 for SP500 and optional modules ) . FE and MS have different working interface. When connected SP500 to scan on MS software used Frontman. It is necessary for SP500 . On software you selected auto mode. Select semi mode and you can edit pictures. Need do it before scaning. gofilm-minilab 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now