SP3000 35mm adjustment

[osbdr555]

Hi All,

Im helping out a lab that has an SP3000 which I have just virtualised.

I noticed that every time they scan 35mm film they need to adjust the photos by moving them 3 keyboard button presses to the left in order to centre them.

I assume that there is a way to adjust this so that they don't have to 'move' every photo to the left? I had a poke around the Maintenance menu in the software and saw a few potential options but wanted to check with those that know what the best method is and also if there are any potential problems with making the adjustment?

Thanks,

David

[pandai]

It's in the maintenance menu, 0451.

On the 2nd page you should find 135 pitch correction. Increase value to move image left, decrease to move right.

Edited September 23 by pandai

[osbdr555]

Thank you for the reply Pandai

 

[osbdr555]

On 9/23/2026 at 10:35 AM, pandai said:

It's in the maintenance menu, 0451.

On the 2nd page you should find 135 pitch correction. Increase value to move image left, decrease to move right.

Hi Pandai,

These are the settings on the page you mentioned.

If I need to click the left arrow on the Fuji keyboard 3 times to centre the image, which setting from the ones in the screenshot is most likely to move the image correctly?

Or do I just try them one at a time noting the original setting.

Thanks,

David

[pandai]

What film carrier are you using?

Is this an SP500?

[osbdr555]

8 hours ago, pandai said:

What film carrier are you using?

Is this an SP500?

This is for an SP3000 and this is with 35mm film. So 35mm carrier.

Is there more than 1 type of 35mm carrier?