Brett G Posted November 4 Report Posted November 4 Can anyone help with a Noritsu HS1800? we have a HS1800 and we just can’t get the colours how we want. We have an LS1100 and the colours seem really nice on that. I just cannot replicate the same on the HS1800. We have been trying the scanner slope correction and still can’t replicate the 1100, we have pics side by side on the same screen to test. Our HS1800 seems a little on the blue side, but when we remove blue it shifts other colours. So we just can’t get it looking like the other.. if someone can help that would be great. I have spent hours n hours trying to get it right ..
Dave S Posted Thursday at 05:26 PM Report Posted Thursday at 05:26 PM Can you do a screen shot of the HS-1800 scanner sensitivity check screen
Brett G Posted Thursday at 05:38 PM Author Report Posted Thursday at 05:38 PM Hi, thank you for the reply. Please see attached. We had another go with it today but it’s still not as good as the 1100
Dave S Posted Thursday at 05:53 PM Report Posted Thursday at 05:53 PM 11 minutes ago, Brett G said: Hi, thank you for the reply. Please see attached. We had another go with it today but it’s still not as good as the 1100 Has the LED light source been replaced at some point? As the B & G values look unusually low. Sometimes too many corrections in the scanner slope can make things worse. Can you upload some scans done on the LS-1100 and HS-1800 so I can see what the difference is.
Brett G Posted Thursday at 06:24 PM Author Report Posted Thursday at 06:24 PM Hi, yeah it had a new light source around a year ago. Please see attached pic. Left is the 1800 , the concrete floor in real life is the same as the 1100.
Dave S Posted Friday at 11:46 AM Report Posted Friday at 11:46 AM The chroma and sharpness look higher on the HS-1800 scan, this will effect how the colours look. It is very difficult if not impossible to get 2 scanners to precisely match especially with different aged light sources.
Brett G Posted Friday at 12:28 PM Author Report Posted Friday at 12:28 PM Hi, thank you for helping out.. do you think we should look at replacing the light source?
Dave S Posted Friday at 04:09 PM Report Posted Friday at 04:09 PM (edited) 3 hours ago, Brett G said: Hi, thank you for helping out.. do you think we should look at replacing the light source? Have you tried changing the Color Slope Balance correction? It's located in System Management, Image Processing Setting, Master DSA. It works differently to the Scanner Slope Correction. With regard to changing the light source it's difficult to say, ideally you would need to try another one and see if it solves the problem or not. Edited Friday at 04:28 PM by Dave S
Brett G Posted Friday at 05:51 PM Author Report Posted Friday at 05:51 PM Amazing, thank you so much for your help, your knowledge is brilliant
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now