Jump to content

QualexTech

Members
  • Content Count

    64
  • Joined

  • Last visited

  • Days Won

    1

QualexTech last won the day on November 16 2019

QualexTech had the most liked content!

About QualexTech

  • Rank
    Minimum Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. can the mechanical counter be tampered ?
  2. well there is a mechanical counter and it shows very low around 500k and i am not convinced of its accuracy, im just trying to see if i can find out what life expectancy i should have from its laser, tnx
  3. I am in process of purchasing a Noritsu 3011 that has unusual low click count and I wanted to know if there is a way to verify the click count and hours used, in the software ? in the service mode? on a reboot ? Hidden Menu ? Many Thanks Rick
  4. And the bad news now, The 3011 had to be restored from a back up a few days after I installed the board for the CD drive and after the restore the CD again stopped recording, it reads but it DOES NOT write any more. Question 1_ could this unit have caused the data corruption in this unit forcing me to do a restore ? Question 2_ how do I remedy the situation so the cd drive will start writing again. Thank you Rick
  5. So it looks like I have a combination of issues here, _Fix 1 now heats up and never stops, I get overheating error etc, I am leaning towards short SSR as you mentioned _Fix 2 never heats up, I am leaning towards bad heater, now good luck finding a 200W heater, V30 uses one and only in Fix2 and no other machine has 200W heater. This whole thing is driving me nuts, finding parts is a great hassle. Push comes to shove I have to rig a few fish tank heaters independently, I have seen and heard people go this route on very old machines when no parts available, oh boy.
  6. THIS WORKED !!! Thank you. _Now the kicker will be if I can make it burn a DVD to use the capacity. I tried assigning letters with no avail. any thoughts Dave ?
  7. Thank you for the tip however that is too much work and too many variables involved. Can you send a link for the ide-sata convertor please ?
  8. I do, they were working on the donor machine.
  9. Hi Dave, _Can you send me a link to this, I have looked around and there is very many options, some requiring separate power supply etc? _I really can not understand why it doesn't want to work with other drives salvaged from native 3011 machines??? Thank You.
  10. After my CD drive stopped working I have tried a few different CD drives both removed from other 3011 machines and other brands but none of them work, read or write. I did check all of the drive letter assignments in windows and in qss software and matched them all with no luck. Currently I export to HD and burn CD’s on external comp but would love to have this option available too. I haven’t tried to install an external CD drive with a usb connector and Im not even sure if qss will work with that either. is there some other setup I need to do? What am I missing? Im running a H
  11. That is not the case at this end, its hard to find electronic supply stores let alone something this specific used 25 years ago...
  12. Thank you, Digikey is a no go and I have come across the mouser earlier today by my camera repair friend. please define "better Specs" is any of these going to work? https://www.mouser.com/ProductDetail/Crydom/D2W203F-11/?qs=%2Fha2pyFaduhoQVx8%2FTsuHELF9coA59hRntvkN13MFl8%3D https://www.mouser.com/ProductDetail/Crydom/D2W202F/?qs=%2Fha2pyFaduj9Y8VsiqBHf4Qoy4d6q0xWIuiCM1Kp9h4%3D I talked with their tech support and he just gave me a generic answer of not 100% compatible and not recommended, but I think these Are qualified as better, right ? I a
  13. Thank you Dave, I do take the heater out for a 5-10 seconds and not any more. The temps on fix1 and fix2 do not rise above room temp so my thermo sensor or the connector may be faulty. All the wiring is triple checked with all the connector labels and no mismatch here, if I ever swap them around I do them one at a time and put them back immediately etc. I haven't taken the Power pcb out yet, its a great lookin board but I get the idea, I have another batch of films to process and also trying to find some SSR's at the mean time. Then I will take the board out and look for solderi
  14. So I checked them in output mode, CD and stab are all good, Fix 1 out put check works cause I pulled the heater out and could feel it warming up, Fix2 out put check you can hear the relays but no heat on the heater, I switched this heater briefly with Fix 1 and activated the out put check and it heats up, so I know that I have a working heater. But, here is the kicker, both Fix 1 and Fix 2 do not heat up when in normal operation mode all others, CD BL And STB work normal. So while Fix 1 works on output check, it doesn't work normally. and Fix 2 does NOT work on output c
  15. YOU ARE ABSOULOUTLY CORRECT, AFTER STUDING THE SCHEMATIC FOR V30 AND V50 I CAN SEE THAT BOTH USE D2W202LD18 THAT CAN HANDLE UP TO 400w, THEY ARE EVEN USED IN V100 THAT USES 400W AND 600W, FOR THE 600w IN V100 SSR AG80159G01 IS USED WHERE FOR THE 400W THE V100 USES D2W202LD18, VERY INTERESTING.
×
×
  • Create New...