Jump to content

StruggleTech

Members
  • Posts

    31
  • Joined

  • Last visited

Everything posted by StruggleTech

  1. Hi all, May i know which pump and dumper u all mean? Decompression Pump Unit or Ink Passage Pump(Ink Cartridge Holder)? Thanks
  2. Hi, i checked all the pump is in working condition. As for the rubber, do you mean the divider for all the PS tank? and do you mean that when i pour water in PS2 tank, water shouldn't be flowing to the tank next to it? I will check it out rubber seal Thank you very much!
  3. Hi, Ups for this issue, anyone facing the same problem as me, print always got roller mark stain on it. Thanks
  4. Hi Dinusha, I guess might be the connector at CLT23 is disconnected. Check the connection and cable at the board.
  5. Thanks! Will try it. If after changing GPR23 Board and the problem still occur, what else should i look into?
  6. Hi everyone, Problem with my printer when starting every morning, printer will detect itself as LP5700 and there is sorter error. I will need to do a post operation, restart the whole system and printer will back to normal LP5500 and everything works. May i know any face this problem before?
  7. Hi everyone, I have a Ms01 with Lp5700 Printer, i having problem getting "OK" in doing upkeep calibrating in Pre-operational Check which i did 4 to 5 time but still NG. I'm only able to successful to get OK or pass upkeep when i do the calibrating in Paper Condition in the Maintenance Menu. I want to know is there different between both upkeep calibration at Pre-operational check and Paper Condition in the Maintenance Menu? Paper and magazine are the same on both upkeep place i did it. Is there any solution for this problem, i want to able get OK upkeep in Pre-operational check Thanks!
  8. Hi all, DX100 printer, Yellow print pattern wont plug out, the rest of the colour pattern are ok. Replace new printhead also have the same problem, only yellow print pattern clog. anyone face this problem before? Thanks!
  9. the dumping pad, do you mean near the Yellow ink holder side or the Pink Ink Holder side? How do you clean it? Thanks
  10. Hi Pedro, Do you have the firmware with you? Able to Email me the firmware? or Any idea what the Firmware is call? THanks
  11. until now mine still not solve even i call Fujifilm Engineer they also have no idea. They try playing with the setting Color Profile and even change another printer but still the same problem.
  12. Hi everyone, Recently my photo have roller mark on it, i try washing the PS1, PS2 , PS3 and PS4 rack and replace new PS water and it able to solve the problem but after a week or so the roller mark came back again. I found that my PS water on 4 tank got very dirty(Dark brown/Coffee colour) after 1 week or so of replacing. I remember last time my PS4 tank never get so dirty after a month or more after replaced water. I checked on my PSW output there is water pumping out to PS4 tank. Anyone has the same problem or suggestion on this problem? And also anyone know how to check the PSW is pumping water (not using the output measurement) during operation/printing without printing so much photo and is there any setting i can set on the PSW to pump in more water during printing. Thanks!
  13. But i heard DE100 is fully build by Fujifilm unlike DX100 is took from Espon D700..... not sure the durability will be the same.
  14. where can i get or change the profile
  15. Hi, May i know what the down side of the DE100? is it the Colour so bad, Speed of print or function error?
  16. Hi all, Any DE100 user over here, any feedback on pros or cons of this new printer? i am thinking of is it worth changing my Frontier LP5000 to DE100? Thank!
  17. StruggleTech

    Ms01 V4.2

    Hi all, i am using MS01, just want to check with you all, how to calibrate the MS01 colour to match my PC monitor. Thank!
  18. Hi all, Problem with my ASK-300 after changing a new set of paper and ink ribbon, the photo turn abit red (reddish colour). I try replacing another new set of ink ribbon and paper but the colour still remain reddish. Is there any update to do? or is there any way that can change the colour setting of the printer? Thank!
  19. HI, Are Fujifilm Printer able to use share printer, without using MS01(S9,S2,Client), just using printer driver to print. i trying to use 4 PC connecting using share printer to 1 Printer, isit able to printer from the other 3 PC? Thank!
  20. Hi, check with you all, how long do i need to wash the rack? what solution or chemical do you all use to wash the rack or crossover for clearing those dirty/tar chemical? Thank!
  21. HI, By disabling the evaporation correction, will there be any deflect or damage to the printer in long run. Or photo quality? Thank!
  22. Hi all, Anyone know what the Error code "D1F2" My printer all the LED light up and see the History it state this error. Thank!
  23. Hi, Frontier 500 suddenly keep having this error W-LP-2440, Paper end at lower magazine. Everytime i load a magazine. Have already change different type of magazine and also change the lower paper end sensor and change new OPA27 board still have this error. What can i do to solve this fault?
  24. Hi, Frontier 500 suddenly keep having this error W-LP-2440, Paper end at lower magazine. Everytime i load a magazine. Have already change different type of magazine and also change the lower paper end sensor and change new OPA27 board still have this error. What can i do to solve this fault?
  25. my friend also having this problem too, his is pinkish. Print pattern is ok. Call fujifilm also can't fix it. His DL650 haven't been operating seen month.
×
×
  • Create New...