Jump to content


  • Content Count

  • Joined

  • Last visited

About peterr

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thank you for all of your responses. I finally fixed the problem. I removed the sub scan and everything inside the distribution section, and vacuumed all the dust and cleaned the sensors. After doing this, I sent a print and noticed 80% improvement. For my final step, I grounded the scanner, (sp2000) with the printer. After that the problem went away. Cheers everyone.
  2. @yustas I'll look into it today when i get to the shop. @yokololo123 I'll look into motors as well. One small thing i forgot to metion, the lines don't show up on the entire page. For example, when i print on a 10inch paper, they appear on the left side of the paper from top to button and on the top of the paper from left to right. As the lines get to the center of the page they fade out So essentially forming an upside-down L shape.
  3. @Minilab service my 370 printer is connected with the scanner via firewire cable using PIC to upload and print pictures. @yustas @Minilab service update: Today i did see binding in morning set up. So yes, there are lines in morning set up as well. I also replace the firewire cable and i made sure it was grounded correctly. @yokololo123 do you mean the metal band in the sub scan? If so, I did clean the metal band as well. I am still seeing lines in my prints.
  4. Hello all, i have run into some weird issue with my prints. Dark gray Horizontal lines appear on my prints. it appear to be coming somewhere between the magazine and P1. The line come out on wallets, 5,6,8 and 10 inches. So far what i have done is this: I tried to clean the lines off with water and de greaser and no luck. i removed P1 crossover and determine the lines come out from the P1 rack, not cause by the crossover. I did a deep cleaning of P1 and P2 rack ( i use a de greaser spray and a toothbrush to clean and rinse the rollers and gears on the P1 and P2 racks includ
  5. Hi, happy new years In my case all I needed was to re install printers DATA via the floppy disks luckily i did backup my printers data. If you did saved your data before this started happening then one possible solution is to re install your printers data if you do and still having this issues then maybe it can be your backup battery not holding the data and the battery needs to be replace. Hope this helps . Good luck.
  6. Hi guys i was wondering if there is a better file type option to print on the Frontier 370 via PIC other than jpg that will produce a better print quality or maybe there is a better workflow that will help produce a better print quality. My workflow is: I shot in RAW edit in lightroom export from lightroom in srgbIEC61966-2.1 color space then, open in photoshop do more photo editing and from photoshop i save as jpg with ICC file: srgbIEC61966-2.1, then i import to PIC i UNcheck Images Intelligence (remove the check) and send to print. Thanks in advance.
  7. It all makes sense now. Is it possible to use AD200 or AD300 on the frontier 370 if so what are the steps to take? Is replacing the bulb inside the AD100 as simple as unplug and swap? Or is there extras steps to take after replacing the bulb? Great Intel, thank you.
  8. Hi, i have a few question about the CD update is it worth doing the update? What are the benefits/purpose of it? Do I need to update my densitormeter in order for it to read updated paper types? Over all what is the purpose of the update? I've been starring at the CD for a while not knowing what to do with it. Are there any risk of updating involve? I have the frontier 370 version 7.0 Thanks in advance.
  9. Hello, idk if you already found the software but I think I might have it.Im looking for Lut installer version "R" maybe we can do a trade? I can't seem to find it anywhere and my colors aren't looking all that great. If you have it maybe perhaps I can get a copy from you? Hope to hear back soon, thank you .
  10. Oh okay got it. Tiny problem, I fear that dont have the R CD for me to install it. Is there a way to get a hold of it?
  11. Is there a way to correct this issue? It shows K instead of R.
  12. Thank you for replying. I checked and On the screen it shows "K"
  13. Hi everyone, I'm looking for the latest software installer R to allow my frontier 370 to read new paper types. I can't get the printer to say 'OK' after doing paper condition setup ever since I switch paper types, so I'm guessing it's because I don't have the latest software installed. I uploaded a pic for you guys to see. If anyone can point me to the right direction I will highly appreciate it. Thank you.
  • Create New...