Jump to content

PHOTOLABPART.COM

Members
  • Posts

    319
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by PHOTOLABPART.COM

  1. Respected Sir After cut last film if cutter not open (home position ) that time may be you not able to feed leader so please look there if this type problem you have to check cutter solonid Thanks
  2. RESPECTED SIR I HAVE A SOME TECHNICIANS CLINTS FROM UK PLEASE CONTACT BY WHATS UP I WILL GIVE YOU SOME TECH NUMBERS THANKS MY NUMBER IS +917383343040 PHOTOLABPART - INDIA
  3. Respected Sir please check connector J/P 475 CONNECTED TO PC- SCANNER INTERFACE PCB , J/P 437 INPUT POWER SUPPLY +5V) FROM ATX POWER SUPPLY 2000 CODE IS FOR SCANNER I/F PCB REMOVE CLEAN AND REFIX IT AND CHECK ALL CONNECTORS THANKS
  4. RESPECTED SIR PLEASE TRY FIRST AIR FLOW WITH BLOWER FOR DURST IF THERE IS NO CLEAN SENSOR, PLEASE OPNE IT THANKS
  5. Respected sir Ya May be but when we pass film leader in rack may be clean or if the turn belt is cut leader is struck there Thanks
  6. RESPECTED SIR PLEASE PROCESS HARD PLASTIC LIKE A FILM LEADER IN PROCESSOR ONE BY ONE RACKS IF THERE IS DURST IT WILL REMOVE WITH HARD PLASTIC AND THEN NO LINE THANKS
  7. Respected Sir Twin Driver & back up you have to load sapret not including with software Thanks
  8. RESPECTED SIR I HAVE FULL LOADING UNIT IF YOU LIKE TO BUY, PLEASE FEEL FREE CONTACT US THANKS
  9. YES SIR NORITSU FUJI KONICA SAME BUT CUT AND PROCESS IS DIFFRANT AND LOOP SYSTEM IS DIFFRANT SYSTEM THANKS FOR YOUR ADVICE
  10. RESPECTED SIR VERY GOOD HAPPY TO SEE YOUR MACHINE PROBLEM SOLVED I DONT HAVE THIS MACHINE EXPERIENCE BUT IN NORITSU 3201 I FACE SAME PROBLEM WHEN LOADING SENSOR IS FAULTY OR PAPER IS JAM THEIR PUMP AND DRYER NOT STOP THANKS
  11. RESPECTED SIR PLESE SEND ME PIC BY WHATSAPP OR EMAIL WA IS +917383343040 EMAIL IS photolabparts@gmail.com Thanks
  12. RESPECTED SIR PLESE SEND ME PIC BY WHATSAPP OR EMAIL WA IS +917383343040 EMAIL IS photolabparts@gmail.com Thanks
  13. RESPECTED SIR YOU HAVE TO CLEAN BOTH SIDE SENSOR UP AND DOWN THERE IS MALE FEMALE SENSOR YOU HAVE TO CLEAN OR CHANGE BOTH IF YOU LIKE TO CHANGE IT THANKS
  14. Respected Sir Ya may be sensor issue when paper go in processor there is big sensor you have to clean or replace it Thank you
  15. RESPECTED SIR I DONT HAVE A THIS MACHINE EXPERIENCE BUT I THINK THERE IS PAPER IS JAM IN LOADING SECTION SO PROCESSOR IS NOT STOP IF THE PAPER IS COME OUT FROM LOADING SENSOR AFTER FEW MINUTS MUST BE STOP PROCESSOR SO PLEASE CHECK LOADING SENSOR AND MAY BE PAPER JAM THERE THANKS
  16. RESPECTED SIR PLEASE REQUEST YOUR CHEMISTRY SELLER SEND TECHNICAL PERSON WITH CONTROL STRIP AND DENSITOMETER HE WILL PROCESS CONTROL STRIP & HE WILL GUIDE YOU AFTER LOOKING DENSITOMETER READING DMAX, DMIN, HD, LD YOU HAVE TO SET REPL AND TEMP AS TECHNICIAN INSTRUCTION THANKS
  17. RESPECTED SIR I HAVE A V30 FILM PROCESSOR HEATER CONTACT BY WHATSAPP +917383343040 THANKS, WITH WARM REGARDS
  18. Respected Sir Laser glass you have to clean if toh need pic please contact by whataapp my nunber is +917383343040 Thank you
  19. RESPECTED SIR PLEASE CHECK WITH FOGG PAPER IF THERE IS ALSO LINE ITS FROM PROCESSOR SECTION IF ONLY PRINTS LINE YOU HAVE TO CLEAN LASER GLASS THANKS WITH WARM REGARDS
  20. RESPECTED SIR PLEASE CHECK ROLLEERS OF DENSITOMETER UNIT THANKS
  21. Respected Sir Follow manual instructioin If not solved please contact us Thank you
  22. RESPECTED SIR PLEASE SHOW ME PRINTS BY WHATSPP I WILL HELP YOU MY NUMBER IS +917383343040 THANKS
×
×
  • Create New...