Jump to content

photothaibaoui

Members
  • Posts

    90
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by photothaibaoui

  1. hello dear freinds.i want to know the causes of paper jam in ASK300 knowing that the hill fonctione finly.and the sonsor clean...thank you.....
  2. bonjour.ton problem is a shift niveau.it s mean after the consomation of 4 rouloux paper 15.2 there is some chemistry in the bath entretien.p1.p2RA OR P2RB.make a new measurement of the flow pump meter and the value found in the eprouvete(usually between 48 ml and 52 ml). I also recommend that you clean the pump p2ra (filter. mombrane. valve)
  3. first try to adjust the temperature to 30 degrees p1 p2 and ps.'re playing the machines that stand by.
  4. go to the small menu. click menu after 5 times yes. apuier then the arow on the top chosir 7 instalationpuis 3mix rep .....it s mean new instalation. goodluck
  5. go to printer . cheeck d 561 exposition part .d560 avance paper .d563 base largeur guide.......
  6. good morning.if you can stopped easy the rollers probleme could be in stk in pdcboard
  7. hello dear freind .i will gave a miracle solution.remove nozzles from crossoversses .second desactive the auto cleaning but you must clean crossovers by water evry work end...
  8. i think in fe we don t need c4c5 because we use s2
  9. thank you my dear freind.i will cheeck...
  10. yes i do i also restaurate the densitometre.and renisialised it
  11. HELLO MY FREINDS .I HAVE PROBLEME WITH DENSITOMETRE A 200.WHEN I START MESURING TEST IT GAVE ME OK FROM THE FIRST AND IT IS NOT FINE .RED DOMINANTE .I HAVE CLEAN IT AND EVRY THINK SEEMS GOOD .... NOTE. A100 WORK CORECTLY INTHE SAME MACHINE .IT GAVE OK AFTER THE 4TH OR 5TH TEST AND IT IS VERY VERY FINE .....WHO HAVE IDEA.....THANKS
  12. yes i forget because i have only 350 and 375 .but it s alwyas brobleme of connection..or cheeck you voltage 220/240 volts
  13. re set the termostat red bouton
  14. re set the terostat .red bouton
  15. cheeck connection between table scanner and the printer
  16. in the final we will have this result
  17. hello freinds .if someone have this error in each frontier E 2501 ANTY DUST SHUTTER ABNORMAL .that mean the foam is damaged.you must change it .it is very easy to change it you can use product of house .look to this photos .the probleme will disparet...good chance bachy
  18. yes .because we must change the plastic quide ..look at the photo
  19. i agree with mr sisir damaged foam is the first respensable ..
  20. yes i knew but it take time .first choosing 152/102 300pixeles in PNG FORMAT 2 create mask d made indexee pcx .....etc
  21. yes i knew my freind but i have not time.that s all........thank you
  22. good morning my freind .many problemes caused it .first use another densitometre.......
  23. hello freinds .i am looking overlays for my frontier 375.in 15x10 and 18x13 .this is my email thaibaouibachir@yahoo.fr thank you
  24. try to clean sonsor of distribitor.go in print ajustement i/o cheeck d574 d571 d572 d573 probleme may be in the entry of prossessor..after check the d575 .debitmetre could be also a probleme...
×
×
  • Create New...