Search the Community
Showing results for tags 'Fuji'.
-
Hello, In the process of sending photos to print this error accrued. I checked in on/off settings and it shows as ON. A burn smell also coming from the dryer. I was told there is a reset button somewhere around the dryer but I can't seem to find it .is there another way to rest it ? Any help thanks in advance. All connections from the PAC 20 board are well secured. -
Hi minilab community, I got a frontier 550 and i can use a computer with Win7, WinXP and Win2k but I don't really know where to find out all software that I need to install. I need probably MS01 (but i don't know the version). Does anyone know where I can find the software + installation documentation that i need ? My email is : acf75019 @ yahoo fr (please remove space and add a dot between yahoo and fr) Thanks in advance for your response. Bernard
-
Hello, I have a well used Fuji Frontier 375 that is making the white un-imaged (blank) parts of the photo paper turn out with a yellow tint / cast. P1, P2, PS drained, cleaned and replaced, Filters replaced. Once chem was replace it was printing white as white again = all good, but over 12 hours of use the yellow tint returned and also black on daily condition test print have now a blue shade. Machine uses Tetnal CP48 replenishers
-
When printing using the Frontier 570, the papers jam in the head and dryer section. The rollers suddenly stop spinning and make a noise, like they are forcing or something. There's no gears broken, it has been verifed over and over. Many have been changed too. If the cover of the drying section is removed, the rollers of the head seem to spin more easily, but if i touch the black rollers where the paper get out, pressing them to slightly make a resistance, those rollers stop spinning and it make a loud jammed noise. It seem that using sillicone spray on the plastic parts where the shaft of the rollers are supported help for a bit, but the problem come back. My assumption is that something somewhere is old (the machine have 10 years) and create a resistance on the rollers. When paper have to be moved, it is simply too much for the motor whole head and dryer unit. Anyone experimented the same problem, and could pin point me to a solution?
-
hello all, this morning this error: E-2502 Anti-Dust Fan Malfunction pop up on my screen and it wont let me print. Anybody have an idea on how to fix this? Thank you in advance.
-
Hi Where can i find a copy of software order-it for my kiosk Fujifilm Thanks
-
I’m Having this Error While Machine is Turned On Sorter Light is Blinking But Machine Didn’t Initialise Or Connect to Computer kindly Help Me ASAP
-
Grretings. I have a Fujifilm DL650 drylab. We have some lines apperaing on the prints unless we print at maximum quality. We need a backup of the configuration from any other DL650 with software version 4.2. It would be great if anyone could share it with me. It's a small 25 kb file. This might solve the problem.
-
Hello! I've been trying to find the software to reset counters as the printer shows ink tube end of life. If someone would be kind enough to share I would be very grateful! Thanks!
-
Hello all, i have a frontier 370 my P2 keeps going bad and i have no idea what is causing it. The only thing i can think of is not enough productivity(Prints). I am wondering if there is any other reason that can potentially be causing this, perhaps something in the settings? The yellow on my upkeep goes from a nice bright yellow to a mustard color in less than two months. i have done the pump output measurements and input the proper numbers. the pumps seem to work because it does pump chemistry out. I cant think of anything else. any advise, Thank you in advance.
-
I just acquired a Fuji Frontier Sp3000 and have a technician installed me the DIC to get the images on the second computer. I can´t find anywhere to change the format from 16base or 4base jpg to tiff. Also I dont know how to change the name of folders created on the second computer in order to get automatic something different than Job_00001.
-
i everyone i have this problem, the black color looks blue and lost the contrast, and yellow doesn't look degraded the photos look opaque, and the black/white yellow. do you know why this hapenns? what can I do? thanks
-
Hi! I'm thinking about buying a Fujifilm Frontier SP-3000. However, I need to know if it will aqquire som additional costs. I attached the picture the seller has in the listing. He says that the scanner does not come with a PC, due to the fact that the PC was sold with the machine it was connected to. I'm assuming he had a printer connected to it, and that the machine was sold along with the printer? So from what I understand this is a scanner with no computer. Is is hard to connect a new computer and install the drivers? What will the additional cost be? If anyone has any idea, I gladly appreciate some help. As I said - I'm new to this and doesn't know much about it. But I'm hoping someone in here knows. :-) - Matt
-
Hi, i've problems with this error and i can't find a service manual for this minilab. This problem start this day and i can't print any picture. I don't know how fix it.
-
after being shut down for the last 6 months due to covid, we needed to drain/refresh our frontiuer chemistry. our notes from 12 years ago when we last did a mix from scratch said to order 4 kits, so we did (CP48, 600012445 and 600012438) each kit comes with 4 bottles, 2x part A and 2x part B, the instructions say "add 1 bottle" so the question is, instead of ordering 4 kits, should we have only ordered 2? do the 2 small bottles of A and B in the kit add up to 1 bottle, or were we right to order 4 kits, as we apparently did in the past? called Fuji for clarification but apparently no one there can answer the question after waiting 2 days.
-
Thanks in advance for being patient with a new member who's just getting started in an area of photography for which I have very limited previous experience. I'm working with someone right now who has a Fuji SP2500 scanner that was previously configured and working for standalone operation. It's networked to a Windows 10 HP laptop running PIC 2.6 and something called FES in a Windows XP virtual machine under VMWare. All of this was working fine until mid-November, at which point it inexplicably stopped. I've been trying to help them get it back up and running, but don't have expertise on the equipment. I have a lot of experience with computers and electronics in general, and am old enough to have used NT4 and XP when they were new. When the scanning computer starts up, I get this message: I-595 Connect to Imaging Controller for updating data. When I click [OK], I get this error: W-1531 F-DI device registration failed. Check the network connections. Press {Retry] to retry or [Cancel] to cancel. Retrying doesn't help. If I cancel, I can get the scanner to go through what seems to be a series of calibration steps with a film carrier in place. I've checked the network cables and connectivity. Both machines can see shared drives on each other and move files back and forth. They each have a DHCP assigned IP address, and canned be pinged from each other successfully and consistently. Both are assigned to the same Windows Workgroup (MICSGROUP). For the life of me I can't figure out what might have changed to make it all stop working. My colleague doesn't have any disks, and the person who set this up originally is no longer available. I was able to find a folder with what looks like installers for PIC 2.60.0034 and Fuji Personality Disk 2.6. The scanner is attached to a Toshiba 5600FF computer. My colleague also has another one of these scanners that was never configured for operation, but that uses a Toshiba G10 computer. I fired that one up long enough to make sure the computer works (it does). I swapped the computers between the two machines to see if it would help, and it didn't. That machine is available as a source of spare parts. I have some old PC's that run Windows XP natively that I could configure for this project if that would help. I don't see how running PIC in a VM would make this fail when it previously worked, but I'm willing to try anything. If anyone has or can give me detailed instructions for diagnosing and repairing this problem or starting from scratch, I'd be very thankful. If there's someone or someplace I can get the correct software to make this happen, I'd be very glad to know that too. I've had poor luck finding enough information to get this going, and I'm hopeful this group's knowledge and experience will get me on the right path. I'm glad go back and get more information off the machines if that helps. Any advice would be gratefully received.
-
Hey folks! Last week I picked up an SP2500 from a lab that had closed in Cleveland. When going to set it up I am getting an error W-1531 saying that the F-DI device registration failed, check the network connections. I currently have the main imaging controller pc that is part of the sp2500 connected to a Ethernet switch and also have the PIC that is running software version 2.6 connected to the Ethernet switch. Using windows I am able to see and access both computers but I continue to have the device registration error. The only part of the setup that I didn't get was the network hub. Are there settings that I need to change since it is using a new hub? I looked in all the options I could find and nothing. I have also restarted both units and even swapped in a new hub/router just to see Any help would be awesome
-
I'm using stand-alone sp-3000. I found this mark in every frame.. I can't figure out since when it started happening. I found out that this only happens when I use NC100AY carrier... when I scanned the same strips with MFC carrier, there's no mark. Anyone who has experienced similar problem???
-
Hello, I am the owner of Negative and Print photo lab in Detroit, MI. We bought a Fuji SP3000 through CRES Imaging in Washington that came from Dublin, Ireland. The whole process has been somewhat of a nightmare as we bought the scanner two months ago and just received it Friday. Anyways we unpacked everything and turned it on. I went through the Pre Operation check and got the error "Connection to the Imaging Controller Failed. Check the Network Connection." I clicked OK and saw a box saying "E-1775 1st service menu not found. Check the service menu setting file." I've been reading a lot about needing a separate computer with a PIC running a software called C4C5 on it so the scanner can export the files to the separate computer. The problem is I have no idea how to set this up and would be extremely grateful for any and all help. Respectfully, Suraj Bhamra
-
Hi. I have a problem with the Fuji 570 machine, it suddenly happened that the machine does not print photos continuously, more precisely, until it does one dimension of the photo, it does not start working on the next dimension. It waits for one dimension to come out, and only then does it start printing the next dimension.
-
I'm looking for a replacement keyboard for our Fujifilm 362B film processor, as quite a few buttons don't work anymore. Should be the same part as for 360/362/560/562. Part no. 128G03609A. Checked with Fuji and keyboard for 363/563 won't work. Have tried suppliers in Norway, Poland and Ukraine with no luck so far.
-
Hi, I'm recently using SP-3000 for my rolls. I wonder how I change the default setting for order Id which is basically "A". I explored the whole menu but I couldn't find it.
-
Hi everyone! We bought a second hand film minilab Fuji FP-230b. It was cleaned and reconditioned and would like to start it as soon as possible. We're in Romania and could not find Bleach starter. All the other chemicals are good to go. (all chemicals are kodak ) Is there any way to use the machine without the starter? Like a recipe to diminish the bleach power with more water or something?
-
Hello there everyone. Last Friday we replaced the IEEE 1394 from the FMPC and the FMA20 of the Frontier 370 . All is working well except that at the end of the day, when the Frontier shuts down after cleaning, the FMPC suffers some sort of strange crash where all the connections to the FMPC are cut down. The USB ports are disconected (and if i reconnect the USB devices they no longer appear connected, no matter if i use a wireless mouse or a keyboard) the Ethernet port too. We have to hold the Power Button to turn it off forcibly. We tried running the shutdown.exe with a 90 second delay but its not helping around. The thing is worrying me is that turning off forcibly the FMPC will damage the HDD anytime soon and Fujifilm Mexico did not want to give us the software for installation. I think something is wrong with the new IEEE 1394. The FMA20 should not make a PC crash. Any idea what to do? I can't even use a keyboard. The Optiplex 780 has no other ports like the PS2 or the other one.
-
Hi, I'm considering getting FP363SC on ebay. I wonder it works for 120mm and 135mm.
