Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Leonardo

  1. Can't locate the sensor. Any idea of where is it? Thank you.
  2. Paper length is ok. This margin is right-sided from the paper movement direction.
  3. Hello, Having problem with a margin appearing at one side of the 5 inch (127mm) paper prints. Do anyone knows how can i fix or compensate it in service module? Thanks in advance.
  4. Problem appeared after cleaning encoder tape because of that previous problem.
  5. Hello! Here i am again with the D703. Had some problems with lines on the images and nozzle check showing not normal pattern (attached in this post).. Lines are horizontal to the paper movement direction and the nozzle check has some little black spots over the yellow part. Thanks in advance for your precious support!
  6. Cleaning solved for a while (few days) but the error is back again. After some nozzle check prints, everything returns to normal and the mystery remains. 🤔
  7. The extension is always 07122-00004. 🤷‍♂️
  8. Hello everyone. Recently printer started to have this DC Servo Motor Control Error and I don't have any idea of what does it mean. After some "cleaning the error" in ez controller, it turns back to normal until the end of the day. Then next day, first prints and the error comes back.. I repeat the process and so on. It started to happen coincidently with the cold weather here in my region, so my only suspect is about low temperature issues. Does it make sense to you? Thanks!
  9. Hello guys! I have a Noritsu D703 operating with EZ Controller version 5.80.020 and since a time ago, i've started to deal with some troubles (sensor error, backup error, decurl motor, etc..). In my opinion it's more like hardware problems (second hand equipment) but i also had been told that it could be because my pc is not running only ez controller but other programs/apps that could affect it's performance, so the computer must have only ez controller installed, no program else. I found it a curious argument, could this be true?
  10. I've opened service module and entered this password by pressing [F] + [-1]. Nothing happened. Did i do something wrong?
  11. Hello guys! My Noritsu D703 is constantly showing errors in detecting magazine paper and i'm about to open it and see if there's any problem going on with decurl motor, sensor or anything like that. In order to do that, i know its recommended to disable these components using service password, so i'd be very grateful if someone could tell me this.
  12. That confirms what another member has told me. Thanks for the information.
  13. Hello.. Any news about that issue? Is there anyone who uses dx100 with epson order controller? Thanks..
  • Create New...