Jump to content

nick2898

Members
  • Content Count

    30
  • Joined

  • Last visited

1 Follower

About nick2898

  • Rank
    Advanced Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Okaye purnomosetiawan i will check all these and will update asap thanks for your support and kindness
  2. Its horizontal banding........Bi-d Adjustment is correct....Didnt check the motor measurement and CR motor,,i will check it and update the result
  3. no my friend did this all dozen times
  4. Hi hivanov, I did the Paper feed Manual adjustment 6-9 times... well i changed the paper feed rollerI(SMAP Roller) and cleaned the sensor and did the PF Belt Tension Adjustment too. But the result is same.I dont knw what to do now .:-(
  5. Hi dears , Iam facing an issue in my Fuji-film Dx100 printer. There is patches on the print out(both in HQ and SQ prints-please see the attached image for more clarification...) Well to solve i checked all the head related adj,but it doesnt help me at all.Then i changed the print head along with the capping unit. After changing it did all the head related adjustment and all.But still the result is same, Then i tried to print on the HQ mode...but still the result is same. Then i changed the SMAP Roller along with the PF scale and PF Encoder Sensor.But still the result is same 1)Head and capping unit is brand new 2)Head value is correct and adjustments are correct Kindly if anybody gone through this issue and if they solved it,please let me know the reason of this trouble. Regards Nick
  6. nick2898

    DX 100

    its mostly occurs from the cartridge compartments.Well i guess there is two reasons for that,one is the exceed power cleaning and the other is manufacturing defect.
  7. comparing to DX 100 FUJIFILM DE 100 printer is 99 % much better.Trouble free faster than DX100.Four inks
  8. nick2898

    FUJIFILMS DL 600

    I knw that its there in the Service manual... i wan to know that anybody have the replacing the head experience for DL600.
  9. try to get servicesoftware,it wil help you to solve the prblm..
  10. nick2898

    FUJIFILMS DL 600

    Hello everybody Anybody had changed the printer head for the DL600 ?
  11. nick2898

    Chipung

    Hi dear there is and error shown up in that Status....try with different image pls
  12. FOR DL600 NO NEED OF DIFFERENT SERVICE SOFTWARE....THE SERVICE SOFTWARE IS IN ITS MAINTENANCE SOFTWRARE..IF YOU WAN TO KNOW INBOX ME
  13. nick2898

    Ms01 V4.2

    WHAT ALL SOFTWARE YOU NEED ? DO YOU NEED THE FULL MS PACKAGE ?
×
×
  • Create New...