Jump to content

yokololo123

Members
  • Content Count

    5
  • Joined

  • Last visited

About yokololo123

  • Rank
    NooB

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. yokololo123

    Paper Jam

    From what you describe it sounds classic lack of moisture in the paper. Keep it in the refrigerator it will restore its moisture The end of the paper does not fit well between the rolls or the distributor into the processor because it has too large a curve. And the chimera at the end is also related to the end of the roll of paper. And also mainly for its flexibility. At least during dry periods of the year ... I do not think there is a connection to the quality of the paper. But it can help order from another supplier It may be stored elsewhere in a better way and in controlled cooling. As for the Disaster, it actually runs the machine at half speed if I am not mistaken about the speed It basically stops the divider of the paper and enters more slowly in one track. And it does not prevent him from entering the machine in this condition even though it is dry and concave
  2. yokololo123

    Paper Jam

    Sorry about the Daily. There are several options. Does it happen in all sizes? If it happens at a specific size. This could be related to dryness in the air and because of the structure of the machine If this happens to a specific size try putting the paper in the fridge overnight. And when you arrive in the morning, replace the paper in the magazine and print it. And see if it helps. We found in some of the machines that there is a problem of dryness in a certain season and the paper gets a finish chimney that gets stuck in the carriers of the paper and as a result it gets stuck in exactly this place. And not progressing well. The second option is to check the strips leading to the paper it could very well be that one of the strips has gone over the other strip. And does not turn well. It can be a little hard to see that. And also check exactly at the entrance of the strips there are rollers are there any gaps between them? He takes the paper out of the machine into the strips and check that there is no freedom there they should be tight. It's a bit difficult to truth help in such a way that there is no picture of the machine or video. The way you can check for sure. It's lift the lid up and put paper in the microswitch and send pictures and see exactly what the problem is. (But be very careful that you do it. Let nothing fall inside. And not put hands in while she works.)
  3. yokololo123

    Paper Jam

    Can you take a picture of where exactly it got stuck? (Take a picture of the point where the paper gets stuck and you take it out) It will be easier to help you.
  4. The pipe that goes in and out of the pump has a cone in each of them, one of which may be clogged. Or rupture and the fluid does not pass properly...
  5. Hi There can be many reasons we will start from the first. Do you have the little device on the machine? And if so. What is written ? Try pressing the dryer button for a few seconds. With it turns on after from here and starts to heat up this is a problem of the timer in the machine. Try it. and come back to update. From what you describe it seems to be incorrectly defined.
×
×
  • Create New...